Gate motors
Gate Motors by the Sea: Beating Salt, Sand and Rust
Why gate motors fail faster in coastal Cape Town suburbs, and how to make them last: fittings, racks, servicing and what to look for at installation.
By the CPT Installation team · · 3 min read
If you live near the sea in Cape Town, from Sea Point to Bloubergstrand, Muizenberg or Strand, you already know salt eats everything. Gate motors are no exception. A motor that would last fifteen years inland can fail in five by the sea.
What salt and sand do
- Corrode fixings, brackets and base plates until they rust through.
- Attack the rack and pinion, causing rough running and eventually skipped teeth.
- Get into the controller and corrode the circuit board and connectors.
- Seize wheels and guide rollers, especially with wind-blown sand.
- Rust battery terminals, reducing charging.
At installation: specify for the coast
- Stainless steel or hot-dip galvanised fixings throughout.
- Nylon rack where the gate weight allows. It doesn't rust, but it isn't suitable for every gate, so we check the specification.
- A galvanised anti-theft bracket rather than painted mild steel.
- Sealed cable entries into the motor.
- Raised base where sand or water collects.
- Sealed-bearing wheels on sandy sites.
Servicing: every six months
Inland, an annual service is fine. On the coast, we recommend every six months:
- Clean sand from the track, wheels and rack
- Check and clean battery terminals
- Inspect the controller for corrosion
- Lubricate where appropriate (some parts should be kept dry to avoid collecting sand)
- Test safety beams and collision settings
Signs your coastal motor needs attention
- Rust streaks from fixings or the bracket
- Grinding noises or jerky movement
- Gate stopping mid-way in wind
- Remote range getting shorter
Wind as well as salt
Many coastal suburbs also take the full force of the south-easter. Solid gates act like sails. See D5 Evo vs D10 for motor sizing.
Need a coastal installation or service? See gate motor installation and gate motor repairs.