Gate does not open at all
Usual cause: A flat or failed battery, a blown fuse, a failed charger or a controller card damaged by a surge.
Our fix: We test battery voltage under load and the charger output, then replace the failed part.
Repairs · all brands
Gate stuck, beeping or ignoring the remote? We diagnose and repair all major gate motor brands.
A gate that will not open is urgent: you are either locked in or locked out. Most gate motor faults are caused by a flat battery, a failed charger, a worn gate wheel, a misaligned rack or a damaged controller after a power surge. We carry common spares so many repairs are finished on the first visit.
We repair Centurion (D3, D5, D5 Evo, D10, Vantage), ET Nice, Gemini, DACE and Sentry motors, and we check the gate itself. A motor straining against a dragging gate will fail again, so we fix the cause, not only the symptom.
Planning something new instead? See gate motor installation in Cape Town.
Common faults
Usual cause: A flat or failed battery, a blown fuse, a failed charger or a controller card damaged by a surge.
Our fix: We test battery voltage under load and the charger output, then replace the failed part.
Usual cause: Collision sensitivity reacting to a dragging wheel, a stone in the track, a bent rack or wind load on the gate.
Our fix: We clear and repair the running gear, re-mesh the rack and recalibrate the limits.
Usual cause: A flat remote battery, a lost code after a power event, or a faulty receiver.
Our fix: We test and recode remotes and replace the receiver if needed.
Usual cause: A low-battery warning, a mains failure alert or a gearbox strain alarm.
Our fix: We read the diagnostic LEDs or display, fix the cause and clear the alarm.
Usual cause: An obstructed or faulty safety beam, a limit that has drifted, or a gate that has moved on its track.
Our fix: We align or replace the beams and reset the limits.
Usual cause: No anti-theft bracket, or a bracket without a proper lock.
Our fix: We replace the motor and fit a proper bracket so it does not happen again.
Pricing
Real ranges, so you know what to expect before you call. Every job gets a fixed written quote.
| Job | Guide price |
|---|---|
| Call-out and diagnosis | R450 – R750 |
| Replace 12V gate battery, installed | R350 – R650 |
| Replace controller card | R1,800 – R3,500 |
| Replace gate wheels / guide rollers | R600 – R1,600 |
| Replace or realign rack | R450 – R1,400 |
Guide prices for Cape Town in 2026, including labour and standard equipment. Your fixed quote depends on the site, cable runs and the equipment you choose.
Areas
Local advice for your area: the conditions that affect the job and what we recommend.
Guides
3 min read
A practical comparison of South Africa's most popular sliding gate motors: gate weight limits, speed, batteries, spares and which suits your gate.
3 min read
Why gate motor batteries fail, how many openings you get during load shedding, signs your battery is dying and what a replacement costs in Cape Town.
3 min read
What a new gate motor costs installed in Cape Town in 2026: sliding and swing prices, Centurion vs ET Nice, extras like brackets and beams, and hidden costs.
3 min read
Gate won't open, stops halfway, beeps or ignores the remote? The 10 most common gate motor faults in Cape Town, what causes them and what you can check first.
3 min read
How to make an automated gate safe for children, pets and cars: safety beams, collision sensitivity, auto-close settings and a quick monthly safety test.
3 min read
Gate motors and batteries are stolen across Cape Town. How anti-theft brackets work, what they cost and other ways to protect your motor.
Use the manual release. On most Centurion sliding motors you insert the key, turn it and pull the release lever, then slide the gate by hand. On ET Nice motors there is a similar key and knob. Close and re-engage the release afterwards so the gate is secure.
Old batteries lose capacity, especially with frequent load shedding. A faulty charger or a gate that drags will also drain it. A battery older than two to three years is usually due for replacement.
Yes. We repair all Centurion sliding and swing motors, including the D5 Evo, D10 and Vantage, plus ET Nice, Gemini and DACE.
If the gearbox is sound, replacing the battery, board or wheels is usually far cheaper than a new motor. If spares are no longer available, we quote a replacement and reuse the rack and base where possible.
Free quote
Tell us what you need and where. We reply with a fixed quote, usually the same working day.
Call or WhatsApp. We answer during business hours and reply to messages the same day.