Gate motors
Gate Motor Safety: Beams, Collision Sensing and Children
How to make an automated gate safe for children, pets and cars: safety beams, collision sensitivity, auto-close settings and a quick monthly safety test.
By the CPT Installation team · · 3 min read
An automatic gate weighs hundreds of kilograms and moves on its own. Most of the time that's convenient. But gates can injure children and pets, and damage cars, if they aren't set up properly.
Collision sensing
Modern motors, including the Centurion D5 Evo and ET Nice ranges, have collision sensing: if the gate meets resistance, it stops and usually reverses.
The sensitivity must be set correctly:
- Too sensitive and the gate stops for wind gusts or a slightly stiff wheel.
- Not sensitive enough and the gate pushes too hard before stopping.
A gate that keeps stopping on its own is often "fixed" by someone turning the sensitivity right down. That is dangerous. Fix the gate instead.
Safety beams
Safety beams are a pair of infrared sensors mounted across the gate opening. If something breaks the beam while the gate is closing, the gate stops and re-opens before it makes contact.
We strongly recommend beams:
- Where children play near the gate
- With pets
- Where the gate closes automatically
- On complex gates
Beams installed typically cost R900 to R1,800.
Auto-close settings
Auto-close is convenient and more secure, because the gate doesn't stay open. But with auto-close you should have beams, so the gate won't close on a car or person still in the opening.
Teach the household
- Never let children play with remotes or ride through a moving gate.
- Show everyone the manual release. See how to open your gate manually.
- Keep remotes out of reach of small children.
A monthly 2-minute safety test
- Open the gate. As it closes, place a firm object (a cardboard box) in its path. It should stop and reverse on contact.
- Break the safety beam with your hand while the gate is closing. It should stop and re-open.
- Check the gate runs smoothly without jerking.
If either test fails, stop using the automatic function and call a technician.
We install beams and set up safety correctly on every gate motor installation. For existing gates, book a gate motor service or repair.